-40%
Belt Grinder Wheel Set 6'' Inch Drive with 7/8
Belt Grinder Wheel Set 6'' Inch Drive with 7/8
Belt Grinder Wheel Set 6'' Inch Drive with 7/8
Belt Grinder Wheel Set 6'' Inch Drive with 7/8

Belt Grinder Wheel Set 6'' Inch Drive with 7/8" Bore 5" Track 2.5" Idler

$ 92.92

Availability: 100 in stock
  • Restocking Fee: No
  • Item must be returned within: 30 Days
  • Return shipping will be paid by: Buyer
  • Machine Type: Belt Grinder
  • All returns accepted: Returns Accepted
  • Brand: Unbranded
  • Refund will be given as: Money Back
  • Function: Grinding
  • Condition: New

    Description

    Send us a message
    Belt Grinder Wheel Set 6 Inch Drive with 7/8" Bore 5" Track 2.5" Idler
    Belt Grinder Wheel Set 6 Inch Drive with 7/8" Bore 5" Track 2.5" Idler
    CNC machined from Aluminium 6061
    Wheel Set Description
    One (6 inches) Diameter Drive Wheel - 2 inches wide:
    Drive wheel is CNC machined with a 5/8 inch bore (H7 tolerance).  Bore is equipped with a 3/16" keyway and a set screw. The surface of the wheel is truly crowned to insure the belt won't jump off the wheel. Please refer to the wheel's sketch for the exact wheel dimensions - Bore length is (1.57")
    Two x 65 mm (2.5") diameter Idler Wheels - 2 inch wide:
    Each wheel is fitted with 4 bearings
    1/2 inch
    . (Heavy duty 6201 RS bearings)  Bearings are rubber sealed to protect from dust. Bearings are placed back to back (best combination). A 10 mm wide standoff (sleeve) will raise the wheel of the mounting plate. This bearing combination is the best-tested solution against bearing failure as it allows for tightening the mounting bolts without causing any axial force on the bearings (ball bearings should not bear lateral load)
    One 5 inches diameter Track Wheel - 2 inches wide:
    Large Tracking wheels adds considerable control and stability to the sanding belt (from experience)
    Each wheel is fitted with Four  1/2 inch bearings. (Heavy duty 6201 RS bearings)  Bearings are rubber sealed to protect from dust. Bearings are placed back to back (best combination). A 10 mm wide standoff (sleeve) will raise the wheel of the mounting plate. This bearing combination is the best tested solution against bearing failure as it allow for tightening the mounting bolts without causing any axial force on the bearings (ball bearings should not bear lateral load)
    Payment
    We accept Paypal Payments and other
    Shipping
    All orders are shipped the same day if paid by 2 PM central USA time
    Expedited Shipping (USPS Priority Mail)
    Returns
    30-day returns. Buyer pays for return shipping
    Other
    FEEDBACK
    Thanks for purchasing our product.
    If you are satisfied with our service, your comment is very important in our business success.
    If you are not happy with our service please contact us to solve the problem ASAP.
    Feel free to ask any question.
    Kind Regards